Rear High Flange Track Hub Double Fixed 120 mm Spacing Bolt-On (Pro Model)
Our Pro track hubs are available in two versions: high flange or low flange. They are available in 24, 28, and 32 spoke hole configurations. Our Pro track hubs come with our Carbonyte Phil spec bearings which are our low drag bearings which have partial contact seals and have a 30% fill with our full synthetic Phil Carbonyte grease.Our Pro double fixed track hub has a weight of about 306 grams.
|SPECIFICATIONS||PRO: HIGH FLANGE 2X|
|Hub shell material||6061 Aluminum|
|Axle material||7075 Aluminum|
|Rear end cap material||Stainless Steel|
|Rear washer material||Stainless Steel|
|Lockring material||7075 Aluminum|
|Rear hub width||120 mm|
|Axle diameter||12.68 mm|
|Bearing availability||R8 (carbonyte)|
|Rear hub weight||Bolt (306 grams)|
|Rider and bike weight limit||190 lbs / 86 kgs|
|Materials||All of our manufactured items are machined out of US-produced materials.|
For optimal performance, we recommend using the Phil Wood track cog. They are offered in both 1/8″ and 3/32″. Our specification for the threading is 1.370 x 24 tpi, but Phil Wood hubs will accommodate most high quality cogs. If, during installation, the cog jams or binds, STOP. Forcing a cog onto the hub will result in irreparable damage to the threads. As with any cog installation, lubricate both the cog and lock ring threads. Some cog manufacturers are making cogs that are not ideal for use with Phil Wood hubs due to their thickness (which is generally a result of plating). For this reason, we do not recommend using any other manufacturers lock ring on our track hubs. The additional thickness can result in stripping of the lock ring and/or hub threads because there is not enough thread engagement. Please call us if you have additional questions.